Free shipping on first order, code: WELCOME.

Kindral
Ready to ship4.550 reviews

Laser Guided Scissors

Shows a red line where your cut will go, so long cuts across fabric and paper stay on course.

$17.99

Long cuts across fabric or wrapping paper drift because you can only watch the blade tips. These scissors shine a red line ahead of the blades, so you can see where the cut is heading.

1

Free shipping on your first order with code WELCOME

Free US shippingover $59
30-dayfree returns
Securecheckout
  • Red laser line marks the cut
  • Stainless steel blades
  • LR44 button cells included
  • Two screws line the laser up

Long straight cuts

Follow a line you can see

Without a guide, a cut wanders as the blades move away from where you started. The laser puts a line on the material ahead of the blades.

Ordinary scissors

  • Rule a pencil line first, or cut by eye
  • The pencil line hides under the blade as you cut
  • A long cut drifts a little with every snip
  • Pencil marks left on the fabric afterwards

Laser scissors

  • One small mark at the far edge is enough
  • The red line lies on the material ahead of the blades
  • Keep the line on your mark and the cut follows it
  • Nothing drawn on the fabric to wash out
Cutting navy fabric along the red laser line

How to use it

A straight cut in three steps

  1. 01

    Mark the far edge

    Make a small mark where the cut should finish, on the edge of the fabric or paper furthest from you.

  2. 02

    Switch the laser on

    Press the button on the side of the handle, lay the material flat and rest the lower blade on the table.

  3. 03

    Cut along the line

    Point the red line at your mark and cut, keeping the line on the mark as you go.

What they cut

Fabric, paper and gift wrap

  • Sewing

    Cutting fabric to length, or a long strip for binding.

  • Gift wrap

    Taking a sheet off the roll in one straight line.

  • Paper crafts

    Strips and panels for scrapbooks and card making.

Cutting navy fabric along the red laser line

Close up

Laser, blades and handles

Kindral laser guided scissors with the laser on, lighting the blades red
  1. Laser window

    The red line comes out here, below the pivot, and runs forward along the lower blade onto the material.

  2. Stainless steel blades

    The scissors are 8.5 in (21.5 cm) long overall, with stainless steel blades for fabric, paper and gift wrap.

  3. Finger loops

    A long loop for your fingers and a round one for your thumb, with the laser housing built in beside it.

Compared

Laser scissors or a ruler and pencil?

A ruled line is still the way to cut an exact measured width. For long cuts by eye, the laser saves drawing one.

ComparedThis productLaser scissorsRuler and pencil
A line to follow while you cutYesYes
Nothing left to wash outYesNo
Needs a mark at the far edgeYesNo
Exact measured widthsMark and checkYes

Try it at home

Use it for 30 days. If it doesn't earn its place, send it back.

Tracked US shipping, usually 5 to 10 business days. Free on orders over $59, otherwise $4.99. If it isn't right for your kitchen, tell us within 30 days and we'll arrange a free return.

Get yours

Questions

Yes, the LR44 button cells for the laser come with the scissors. To change them later, turn the cap marked with a cross anticlockwise, swap the cells and turn it back.

Turn the two small screws on the side of the laser housing until the red line runs along the lower blade. Try a cut on scrap paper before you start on the real thing.

Treat it like a laser pointer: never look into the beam or shine it at anyone's eyes, and keep the scissors out of children's reach. Switch the laser off when you are not cutting.

Yes. The blades work like any other pair of scissors, so they keep cutting when the laser is switched off or the button cells run flat.

Fabric, paper and wrapping paper, which is what the blades are made for. Leave wire, thick card and food to other tools so the edges stay sharp.

Lay the fabric flat on a table and mark where the cut should end. Rest the lower blade on the table, switch the laser on and keep the red line on your mark as you cut.

Reviews

4.5

50 reviews

Filter

Beth M.

Nov 8, 2026

Verified buyer

Great product, arrived quickly and exactly as described.

Helpful?
Report

Xavier T.

Nov 6, 2026

Verified buyer

Absolutely delighted with this purchase.

Helpful?
Report

Grace K.

Oct 30, 2026

Verified buyer

Best purchase ever. Exceeded expectations.

Helpful?
Report

Alex T.

Oct 28, 2026

Verified buyer

Will be ordering again soon.

Helpful?
Report

Xavier T.

Oct 28, 2026

Verified buyer

Exactly what I needed. Will definitely buy again.

Helpful?
Report

Iris W.

Oct 27, 2026

Verified buyer

Outstanding service and product.

Helpful?
Report

Alex T.

Oct 24, 2026

Verified buyer

Love it! Works perfectly as described.

Helpful?
Report

Tina S.

Oct 22, 2026

Verified buyer

Very satisfied with this purchase. Worth every penny.

Helpful?
Report

Uma V.

Oct 19, 2026

Verified buyer

Exceeded all my expectations.

Helpful?
Report

Victor P.

Oct 19, 2026

Verified buyer

Absolutely delighted with this purchase.

Helpful?
Report

Showing 10 of 50