Beth M.
8 Nov 2026
Verified buyer
Great product, arrived quickly and exactly as described.
Helpful?
ReportReady to ship4.550 reviews
Laser Guided Scissors
Shows a red line where your cut will go, so long cuts across fabric and paper stay on course.
€20.99
Long cuts across fabric or wrapping paper drift because you can only watch the blade tips. These scissors shine a red line ahead of the blades, so you can see where the cut is heading.
1
Can't be delivered to Bosnia and Herzegovina, Cyprus, Estonia, Faroe Islands, Finland, Gibraltar, Iceland, Liechtenstein, Monaco, Montenegro, Netherlands, Romania, San Marino, Switzerland, Ukraine and Vatican City. Every other country in our European store is fine.
Free shipping on your first order with code WELCOME
Free deliveryover €59
30-dayfree returns
Securecheckout
- Red laser line marks the cut
- Stainless steel blades
- LR44 button cells included
- Two screws line the laser up
Long straight cuts
Follow a line you can see
Without a guide, a cut wanders as the blades move away from where you started. The laser puts a line on the material ahead of the blades.
Ordinary scissors
- Rule a pencil line first, or cut by eye
- The pencil line hides under the blade as you cut
- A long cut drifts a little with every snip
- Pencil marks left on the fabric afterwards
Laser scissors
- One small mark at the far edge is enough
- The red line lies on the material ahead of the blades
- Keep the line on your mark and the cut follows it
- Nothing drawn on the fabric to wash out
How to use it
A straight cut in three steps
- 01
Mark the far edge
Make a small mark where the cut should finish, on the edge of the fabric or paper furthest from you.
- 02
Switch the laser on
Press the button on the side of the handle, lay the material flat and rest the lower blade on the table.
- 03
Cut along the line
Point the red line at your mark and cut, keeping the line on the mark as you go.
What they cut
Fabric, paper and gift wrap
Sewing
Cutting fabric to length, or a long strip for binding.
Gift wrap
Taking a sheet off the roll in one straight line.
Paper crafts
Strips and panels for scrapbooks and card making.
Close up
Laser, blades and handles
Laser window
The red line comes out here, below the pivot, and runs forward along the lower blade onto the material.
Stainless steel blades
The scissors are 21.5 cm long overall, with stainless steel blades for fabric, paper and gift wrap.
Finger loops
A long loop for your fingers and a round one for your thumb, with the laser housing built in beside it.
Compared
Laser scissors or a ruler and pencil?
A ruled line is still the way to cut an exact measured width. For long cuts by eye, the laser saves drawing one.
| Compared | This productLaser scissors | Ruler and pencil |
|---|---|---|
| A line to follow while you cut | Yes | Yes |
| Nothing left to wash out | Yes | No |
| Needs a mark at the far edge | Yes | No |
| Exact measured widths | Mark and check | Yes |
Try it at home
Use it for 30 days. If it doesn't earn its place, send it back.
Tracked delivery across Europe, usually 8 to 15 business days. Free on orders over €59, otherwise €4.99. EU prices include VAT, so there's nothing to pay on arrival. If it isn't right for your kitchen, tell us within 30 days and we'll arrange a free return.
Questions
Yes, the LR44 button cells for the laser come with the scissors. To change them later, turn the cap marked with a cross anticlockwise, swap the cells and turn it back.
Turn the two small screws on the side of the laser housing until the red line runs along the lower blade. Try a cut on scrap paper before you start on the real thing.
Treat it like a laser pointer: never look into the beam or shine it at anyone's eyes, and keep the scissors out of children's reach. Switch the laser off when you are not cutting.
Yes. The blades work like any other pair of scissors, so they keep cutting when the laser is switched off or the button cells run flat.
Fabric, paper and wrapping paper, which is what the blades are made for. Leave wire, thick card and food to other tools so the edges stay sharp.
Lay the fabric flat on a table and mark where the cut should end. Rest the lower blade on the table, switch the laser on and keep the red line on your mark as you cut.
Reviews
4.5
50 reviews
Filter
Xavier T.
6 Nov 2026
Verified buyer
Absolutely delighted with this purchase.
Helpful?
ReportGrace K.
30 Oct 2026
Verified buyer
Best purchase ever. Exceeded expectations.
Helpful?
ReportAlex T.
28 Oct 2026
Verified buyer
Will be ordering again soon.
Helpful?
ReportXavier T.
28 Oct 2026
Verified buyer
Exactly what I needed. Will definitely buy again.
Helpful?
ReportIris W.
27 Oct 2026
Verified buyer
Outstanding service and product.
Helpful?
ReportAlex T.
24 Oct 2026
Verified buyer
Love it! Works perfectly as described.
Helpful?
ReportTina S.
22 Oct 2026
Verified buyer
Very satisfied with this purchase. Worth every penny.
Helpful?
ReportUma V.
19 Oct 2026
Verified buyer
Exceeded all my expectations.
Helpful?
ReportVictor P.
19 Oct 2026
Verified buyer
Absolutely delighted with this purchase.
Helpful?
ReportShowing 10 of 50